Wood Stove Cost by Setup Guide
The setup layer prints apart by frame: Frame A prices four setups installed, from a replacement at $3,000 to $5,000, while Frame B prints one installation band and no setup split.
Orange County, CA · Updated 2026 · Costs shown as ranges — your quote will vary by installer and scope
The setup layer, priced apart
| Frame | Line, as published | 2026 band |
|---|---|---|
| Frame A | replacement of an existing stove, installed | $3,000-$5,000 |
| Frame A | installation into an existing masonry chimney, installed | $4,000-$8,000 |
| Frame B | wood-burning stove installation, all setups | $1,500-$4,000 |
| Frame B | by-setup split | no line printed |
Every figure here is a published line inside its own frame, never averaged into one band. Setup is the first attribute Frame A names; Frame B prints no setup split at all. The project whole prices on the wood stove hub; the stove-type layer on the type guide.
Frame A by-setup lines, as reported
| Setup line, as published | Frame | 2026 band |
|---|---|---|
| Replacement of an existing stove, installed | Frame A | $3,000-$5,000 |
| Installation into an existing masonry chimney, installed | Frame A | $4,000-$8,000 |
| New installation with no existing chimney, installed | Frame A | $5,500-$9,000+ |
| Basement installation with new chimney, installed | Frame A | $6,500-$10,000+ |
Frame A's by-setup table is an installed table: each setup prints with its total installed band. The replacement line prints the lowest band of the four; the two lines naming a new chimney print open-ended tops, and the basement line prints the highest floor of the four.
Frame A totals behind the setup lines, as reported
| Total line, as published | Reading | 2026 band |
|---|---|---|
| Wood stove installation, in HomeGuide wood-stove data | on average | $3,000-$8,000 |
| National average, in the same data | per project | $5,500 |
| Minimum, in the same data | per project | $2,500 |
| Maximum, in the same data | per project | $12,000+ |
The four setup bands sit against one headline reading: an average band of $3,000 to $8,000 with a national average of $5,500 inside it. The replacement band sits inside the headline band; the basement band rises above its top. Each setup line is read against the headline on its own frame only.
Frame B reading for the setup buyer, as reported
| Frame B line, as published | Reading | 2026 band |
|---|---|---|
| Wood-burning stove installation, in Angi data | per project | $1,500-$4,000 |
| National average, in the same data | per project | $3,000 |
| Labor, in the same data | per project | $500-$3,000 |
Frame B answers the setup question with one band, not four: $1,500 to $4,000 for the installation, counted more narrowly than Frame A's full-project reading, with labor printed apart at $500 to $3,000. No replacement, existing-chimney, no-chimney, or basement line prints in Frame B, and none is derived from its band here.
Reading a setup quote, by frame
A setup line answers the starting-point question: the stove already in place, the chimney already standing, no chimney at all, or a basement placement. A quote names its setup in its first line and its frame beside it.
- Setup named beside every band: replacement, existing chimney, no chimney, or basement
- Installed bands read apart from the narrower installation band
- Each frame's setup reading read on its own frame only
Frequently asked questions
How much does replacing an existing wood stove cost, as published?
Frame A prints replacement of an existing stove at $3,000 to $5,000 installed, the lowest of its four setup bands. Frame B prints no replacement line; its installation band is $1,500 to $4,000 for the project as a whole.
What does installation into an existing masonry chimney cost, as reported?
Frame A prints installation into an existing masonry chimney at $4,000 to $8,000 installed. That line sits inside Frame A's headline average band of $3,000 to $8,000, national average $5,500.
What does a new installation with no existing chimney cost, as reported?
Frame A prints new installation with no existing chimney at $5,500 to $9,000 or more installed, and basement installation with new chimney at $6,500 to $10,000 or more. Both lines print open-ended tops.
Does Frame B split its price by setup, as reported?
No. Frame B prints one installation band of $1,500 to $4,000, a national average of $3,000, and a labor band of $500 to $3,000, with no by-setup split. The setup split is Frame A's reading only.
Can a Frame A setup band and the Frame B band be combined into one setup price?
No. Frame A counts the full project and Frame B counts the installation more narrowly. The frames and their setup readings are never blended, and neither band is converted into the other.