Fence Installation Cost Estimator
Enter your fence length and pick the material — get a low-to-high installed band for Orange County.
Orange County, CA · Updated 2026 · Ranges from our cost guides — your quote will vary by contractor and scope
How this calculator works: it combines the cost bands published in our Orange County cost guides with a few choices about your project. The output is a range — low, typical, high — with the assumptions listed. It is a planning tool, not a contractor bid.
Your project
Typical OC privacy fence jobs run 100–200 linear feet. Measure the run, or pace it off and round up.
Rates are Orange County installed ranges; privacy-fence sanity band $2,400–$6,400 for 100–200 ft (homeblue / buildermarket, grounded cycle-3).
What drives the cost
- Length — the master variable; price is per linear foot, so the run sets the total.
- Material — wood $20–$45/ft; vinyl $40–$60/ft; chain-link $10–$20/ft installed (OC, grounded cycle-3). Privacy fence = wood or vinyl.
- Sanity band — a 100–200 ft privacy fence typically runs $2,400–$6,400 (homeblue / buildermarket).
- Gates — walk gate $200–$400, double-drive gate $600–$1,200; often quoted separately.
- Site factors — slope, old-fence demo and haul-away, concrete vs. dirt post setting, and permit fees.
Estimate, not a quote
These numbers are estimates only — not a quote, not a bid. Bands are computed from the cost ranges published in our Orange County cost guides (2026), which are themselves compiled from contractor-published pricing and industry data. Your actual price depends on scope, materials, access, timing, and the contractor. Always get 2–3 written quotes and compare the scope line by line, not just the total. We don't sell services and we have no contractor relationships.