Termite Fumigation by Method Guide

Termite fumigation cost by method, rows apart.

Orange County, CA · Updated 2026 · Costs shown as ranges — your quote will vary by firm and scope

Reading this guide: every figure below is a range from published pricing data — not a quote. Two frames are named apart and never blended: Frame A (the Angi frame) and Frame B (the HomeGuide frame). The frames count the same job differently; that difference is named on every page. Always get 3 written quotes.

Method readings, priced apart by frame

Method row, Frame APer linear footPer sq ft
Chemical fumigation$5-$20$1-$4
Heat tenting$10$1-$3

Frame B prints no per-linear-foot tenting line as printed: its linear-foot lines belong to the tentless lanes on the standing treatment hub -- bait and liquid soil lines -- and stand named apart there, never as tenting rows here. A method row is never repriced as a size row: the chemical fumigation line and the heat tenting line each keep their own unit, per linear foot against per square foot apart inside Frame A, whole-home bands apart inside Frame B.

Method bands: Frame B

Method row, Frame BWhole-home readingFrame B note
Gas fumigation$2,000-$8,000tented band as printed
Heat treatment$2,000-$6,000tented band as printed
Rate line, fumigation / tenting$1-$4 per sq ftrate line as printed

Frame B bands behind the rows: gas fumigation at $2,000-$8,000 against heat treatment at $2,000-$6,000, whole-home readings apart.

Method against method, frame against frame

A chemical fumigation row read per linear foot at $5-$20 against a heat tenting row at $10 per linear foot, priced apart by method and by unit. The frames price the same job apart -- an average at $3,000 with most jobs at $2,000-$5,000 in Frame A against a whole-home band at $2,000-$8,000 with no average printed in Frame B, an inspection line at $100-$300 against $0-$250, a heat line read per unit in Frame A against a whole-home heat band at $2,000-$6,000 in Frame B -- a frame difference, never averaged, never blended.

The unit split stands on every row: a per-linear-foot reading counts the perimeter line, a per-square-foot reading counts the interior line, and a whole-home band counts the single job whole -- three readings of two methods, printed apart inside their frames and never converted into one another on this guide.

The neighbours named apart

Named apart, never a row here: termite treatment, the liquid, bait, and spot methods on the standing treatment hub; termite inspection, the inspection visit; the bed-bug cluster, a bed-bug job; the pest-control service page, general pest visits; and termite damage repair, the repair job after a treatment -- this cluster prices the whole-structure tenting job alone.

The local read

The local read: the frames above are national published frames; a written quote for one address and one size line is the only local figure.

Reading a quote

Cost guide, not advice: ranges compiled from published pricing data; your price varies with the size, the method, and the firm as quoted. No firm, brand, or product is endorsed, rated, or recommended here. Ranges only, not quotes.

Frequently asked questions

What does termite fumigation cost by method, as reported?

Frame A prints chemical fumigation at $5 to $20 per linear foot and $1 to $4 per square foot, and heat tenting at $10 per linear foot and $1 to $3 per square foot. Frame B prints gas fumigation at $2,000 to $8,000 and heat treatment at $2,000 to $6,000 as whole-home bands, each apart.

What does chemical fumigation print at, as reported?

Frame A prints both unit readings: $5 to $20 per linear foot of perimeter and $1 to $4 per square foot of interior, apart. Frame B prints a gas fumigation whole-home band at $2,000 to $8,000, named apart.

What does heat tenting print at, as reported?

Frame A prints heat at $10 per linear foot and $1 to $3 per square foot. Frame B prints a heat treatment whole-home band at $2,000 to $6,000 -- a frame difference in units, never converted into one another.

What does the per-linear-foot line print at, as reported?

Frame A prints fumigation at $5 to $20 per linear foot and heat at $10 per linear foot. Frame B prints no per-linear-foot tenting line as printed; its linear-foot lines sit in the tentless lanes on the standing treatment hub, named apart.

Is a bait system priced on this guide?

No. Bait and liquid soil lines belong to termite treatment on the standing treatment hub, named apart and never a tenting method row here; termite inspection, the bed-bug cluster, the pest-control service page, and termite damage repair stand in their own lanes. This guide prices tenting by method.

Related guides