Sump Pump Repair Cost by Part Guide

The repair visit priced by failed part: float, switch, valve, line, and motor rows apart.

Orange County, CA · Updated 2026 · Costs shown as ranges — your quote will vary by installer and scope

Reading this guide: every figure below is a range compiled from published 2026 pricing data — not a quote. Two published frames are named apart and never blended: Frame A (the Angi frame) counts sump pump plumbing repairs as one band with a minor-repair band beside it; Frame B (the Modernize frame) counts a repair visit by failed part. Always get 3 written quotes.

The part readings, priced apart by frame

Part readingFrame A readingFrame B reading
Float or float armin $100-$300 minor band$75-$125 part row
Switchin $100-$300 minor band$150-$350 part row
Visit overall$400-$550 plumbing bandrows priced apart

Each reading is one frame's own counting of one failed part: a part row counts the named part alone inside one repair visit, and per-part rows are never blended into a swap row.

The part rows, priced apart

Part rowFrame A readingFrame B reading
Check valvein plumbing band$125-$200
Discharge linein plumbing band$100-$225
Power cord, outlet, GFCIin plumbing band$100-$300
Plumbing repairs overall$400-$550rows priced apart

Frame B prints its part rows as their own lines; Frame A prints no per-part rows, standing in its plumbing band with its minor-repair band beside it, and a row with no printed line in one frame stands as in that frame, never filled from the other frame.

The motor and impeller rows, priced apart

Part line, as publishedFrame2026 reading
Motor or impeller serviceFrame B$400-$800
Plumbing repairs bandFrame A$400-$550
Minor repairs bandFrame A$100-$300
Full replacement, apartFrame B$800-$1,600 all-in

The motor lines count the named part service alone: Frame B prints one row for motor or impeller service beside its smaller part rows, never merged into a float or switch row. The two frames count the same float job differently -- Frame A reads minor repairs such as a switch or float replacement at $100-$300 as one band, while Frame B reads a float or float-arm replacement at $75-$125 as its own by-part row. That difference is named as a frame difference on every page here, never averaged.

The totals behind the rows, and the neighbours named apart

Behind the rows stand the headline lines: Frame A plumbing repairs at $400-$550 with minor repairs at $100-$300, Frame B part rows from a $75-$125 float row to a $400-$800 motor row. The repair ticket against the swap and new-system tickets prices apart on the repair-vs-replacement guide. Named apart, never a row here: the sump pump installation cluster, its own field pricing a pump swap and a new system as installation tickets; basement waterproofing systems, a system purchase and never a repair visit; and French drains, a drainage run and never a pump repair.

Reading a by-part quote, by frame

Cost guide, not advice: the ranges below are compiled from published 2026 pricing data. Your price will vary with the failed part and the pump type as quoted. This guide does not endorse, rate, or recommend any firm or brand. Figures are ranges only, not quotes.

Frequently asked questions

What does sump pump repair cost by part, as reported?

Frame B prints a float or float-arm replacement at $75 to $125, a switch replacement at $150 to $350, and a check valve replacement at $125 to $200 as part rows. Frame A counts its parts inside a $100 to $300 minor-repair band. A frame difference, never averaged.

What do the discharge and power rows print at, as reported?

Frame B prints discharge pipe repairs at $100 to $225 and power cord or outlet and GFCI work at $100 to $300 as their own rows. Frame A prints no such rows, standing in its $400 to $550 plumbing band apart.

What does the motor row print at, as reported?

Frame B counts by failed part, standing apart: motor or impeller service at $400 to $800 as one row, its float row at $75 to $125 and its switch row at $150 to $350 beside it. Frame A stands in its plumbing band, apart.

What does the visit total print at behind the rows, as reported?

Frame A prints plumbing repairs at $400 to $550 as one band, minor repairs at $100 to $300 beside it. Frame B prints no single visit total, its rows priced apart in its own frame.

Is a part row the same purchase as a pump swap or a waterproofing system?

No. Each row prices one failed part in one repair visit, off a $400 to $800 motor row in Frame B and a $400 to $550 band in Frame A. The sump pump installation cluster, basement waterproofing systems, and French drains sit in their own lanes, named apart.

Related guides