Siding Repair Cost Breakdown Guide

Siding repair cost by frame, rows apart.

Orange County, CA · Updated 2026 · Costs shown as ranges — your quote will vary by firm and scope

Reading this guide: every figure below is a range from published pricing data — not a quote. Two frames are named apart and never blended: Frame A (the Angi frame) and Frame B (the HomeAdvisor frame). The frames count the same visit differently; that difference is named on every page. Always get 3 written quotes.

Frame lines, Frame A

Frame line row, Frame AReadingFrame A note
Average repair visit$928as printed
Most visits$367-$1,525as printed
Full span, minor to widespread$75-$16,330span lines as printed
Average per square foot$26as printed
Hourly billing$40-$90 per houras printed

The labor lines stand apart: Frame A prints labor at 50 to 90 percent of the total, $450-$820, beside hourly billing at $40-$90 per hour and a trip fee at $100-$300. Frame B prints rates at $40-$90 per hour and no labor-share or trip-fee line -- the same rate band in two frames, never merged, the absences as printed.

Frame lines, Frame B

Frame line row, Frame BReadingFrame B note
Average repair visit$928live read
Average, earlier crawls$916 / $925as printed
Most visits$367-$1,525live read
Most visits, earlier crawls$360-$1,492 / $367-$1,519as printed
Low / high end$75 / $16,330as printed
Contractor rates$40-$90 per houras printed

Frame B holds no labor-share or trip-fee line as printed.

The wood-siding sub-page

Wood sub-page row, Frame BReadingSub-page note
Wood repair average$1,717as printed
Wood repair, most visits$699-$2,876as printed
Pine$1-$5 per sq ftas printed
Douglas fir$3-$5 per sq ftas printed
Cypress$5-$12 per sq ftas printed
Hardwood$5-$20 per sq ftas printed
Redwood$4-$20 per sq ftas printed
Cedar$3-$30 per sq ftas printed

The sub-page counts the wood visit on its own lines: an average at $1,717 against the frame headline at $928, with species rows from pine at $1-$5 per square foot to cedar at $3-$30 per square foot, standing inside Frame B alone, never merged into either frame's headline.

Material lines behind the breakdown

Material rowFrame A readingFrame B reading
Headline bandaverage $928; most pay $367-$1,525average $928; most pay $367-$1,525
Vinyl$2-$4 per sq ft$2-$4 per sq ft
Fiber cement$3-$11 per sq ft$3-$11 per sq ft
Wood$4-$13 per sq ft$4-$13 per sq ft
Aluminum$5-$7 per sq ft$5-$7 per sq ft
Clapboard$5-$10 per sq ftno priced row printed

The material side stands across both frames, apart.

Line against line, frame against frame

A rate line at $40-$90 per hour against a labor share at $450-$820 -- one visit, priced apart by frame line. The frames price the same visit apart -- Frame A prints an average line at $26 per square foot that Frame B never prints, and a clapboard row at $5-$10 per square foot where Frame B prints no clapboard row at all; Frame B prints priced readings at 200 square feet (vinyl at $400-$800, fiber cement at $800-$1,400, aluminum at $1,000-$1,400) that Frame A never prints; Frame B prints its fiber cement row at $3-$11 in its table and $3-$12 in its prose, an inside-frame difference standing as printed -- a frame difference, never averaged, never blended.

The local read

The local read: the frames above are national published frames; a written quote for one address and one siding line is the only local figure.

Reading a quote

Cost guide, not advice: ranges compiled from published pricing data; your price varies with the material, the area, and the firm as quoted. No firm, brand, or product is endorsed, rated, or recommended here. Ranges only, not quotes.

Frequently asked questions

What does the siding repair breakdown print at, as reported?

Frame A prints an average at $928, most at $367 to $1,525, a $26 per-square-foot line, labor at $40 to $90 per hour. Frame B prints an average at $928 live, crawls at $916 and $925, rates at $40 to $90, each apart.

What do the labor lines print at, as reported?

Frame A prints a labor share at $450 to $820 beside billing at $40 to $90 per hour and a trip fee at $100 to $300. Frame B prints rates at $40 to $90 and no labor-share or trip-fee line, as printed.

What does the wood-siding sub-page print at, as reported?

Inside Frame B alone, the sub-page prints a wood average at $1,717, most at $699 to $2,876, species rows from pine at $1 to $5 to cedar at $3 to $30 per square foot.

What do the crawl-variant headline lines print at, as reported?

Frame B prints its average at $916 (most $360 to $1,492) on one crawl, $925 (most $367 to $1,519) on another, $928 (most $367 to $1,525) live -- three readings, never averaged.

Is stucco repair priced on this guide?

No. Stucco repair is the troweled-finish job on the standing stucco cluster, a different purchase, never a frame line; siding installation, masonry repair, and the exterior house painting hub stand apart.

Related guides