Refrigerator Repair Cost by Type Guide
Refrigerator repair cost by type, rows apart.
Orange County, CA · Updated 2026 · Costs shown as ranges — your quote will vary by firm and scope
Type and size readings, priced apart by frame
| Type / size row, Frame A | Reading | Frame A note |
|---|---|---|
| Top-freezer | $100-$350 | type row |
| Bottom-freezer | $150-$400 | type row |
| Side-by-side | $200-$500 | type row |
| French door | $250-$600 | type row |
| Built-in | $300-$700 | type row |
| Compact | $100-$250 | type row |
| Under 10 cu ft | $100-$200 | size row |
| 10-18 cu ft | $150-$300 | size row |
| 19-25 cu ft | $200-$450 | size row |
| 26+ cu ft | $300-$700 | size row |
| Stainless steel | $200-$500 | material row |
| Plastic interior | $75-$200 | material row |
| Glass shelves | $100-$250 | material row |
| Water filter | $20-$60 | material row |
| LED lighting | $50-$150 | material row |
Each reading is one frame counting of one type row or one size row. Frame A detail lines: labor $50-$150 per hour, minimum service fees $75-$125, emergency adds $50-$100. Frame A add-on lines: water line repair $75-$150, filter replacement $20-$60, refrigerant recharge $150-$300, coil cleaning $60-$120, disposal of old parts $20-$50. Frame A prints new refrigerators at $1,000-$3,000 as a context line on its own page; the repair-against-replacement decision stands on the standing decision guide, named apart.
Part lines behind the type rows
| Part row, Frame B | Reading | Frame B note |
|---|---|---|
| Repair band | $125-$500 | average band |
| National average | $300 | minimum $70, maximum $1,400 |
| Compressor | $700-$1,250 | part row |
| Evaporator fan motor | $250-$400 | part row |
| Control board | $400-$750 | part row |
| Door dent repair | $125-$250 | part row |
| Door replacement | $220-$530 | part row |
| Thermostat | $100-$400 | part row |
| Defrost heater | $120-$400 | part row |
| Water valve | $100-$250 | part row |
| Water dispenser tubing | $140-$200 | part row |
| Water supply line | $275-$550 | part row |
| Condenser fan motor | $200-$350 | part row |
| Cleaning coils | $70-$130 | part row |
| Door seal | $100-$300 | part row |
| Drip pan | $125-$225 | part row |
| Entire sealed system | $600-$1,400 | part row |
| Freon / gas leak | $400-$1,100 | part row |
| Condenser | $650-$1,400 | part row |
| Freezer | $100-$400 | part row |
| Ice maker | $100-$225 | part row |
| Wine / mini fridge | $200-$450 | part row |
The part lines stand in Frame B. Frame B detail lines: labor $50-$125 per hour, minimum call-out fees $70-$130.
Type against type, frame against frame
A top-freezer stands at $100-$350 in Frame A while a French door stands at $250-$600 and a built-in at $300-$700 -- three readings of one visit, priced apart by type. Size rows run apart as well: under 10 cu ft at $100-$200 against 26+ cu ft at $300-$700. The frames price the same job far apart -- a compressor at $300-$800 in Frame A against $700-$1,250 in Frame B, a control board at $200-$500 against $400-$750, a door seal at $75-$200 against $100-$300 -- a frame difference, never averaged, never blended.
The neighbours named apart
Named apart, never a row here: the freezer repair cluster, the ice maker repair cluster, and the wine cooler repair cluster, each a different machine with its own cluster; and the standing refrigerator repair cost vs. replace guide, the decision companion, named apart and never rebuilt -- this cluster prices refrigerator repair, the repair visit alone.
The local read
The local read: the frames above are national published frames; a written quote for one address, one problem line, and one part line is the only local figure.
Reading a quote
- Type named beside each figure
- Type lines read apart
Frequently asked questions
What does refrigerator repair cost by type, as reported?
Frame A prints top-freezer at $100 to $350, bottom-freezer at $150 to $400, side-by-side at $200 to $500, French door at $250 to $600, built-in at $300 to $700, and compact at $100 to $250, each type row apart.
What does refrigerator repair cost by size, as reported?
Frame A prints under 10 cu ft at $100 to $200, 10 to 18 cu ft at $150 to $300, 19 to 25 cu ft at $200 to $450, and 26+ cu ft at $300 to $700, each size row apart.
What do material rows print at, as reported?
Frame A prints stainless steel at $200 to $500, plastic interior at $75 to $200, glass shelves at $100 to $250, water filter at $20 to $60, and LED lighting at $50 to $150, each material row apart.
What does a compressor print at on this guide, as reported?
Frame A prints the compressor part row at $300 to $800. Frame B prints the compressor at $700 to $1,250. A frame difference, never averaged.
Is the wine cooler line priced on this guide?
No. Wine cooler repair, freezer repair, and ice maker repair stand in their own clusters as different machines, named apart, and the standing repair-vs-replace guide is the decision companion. This guide prices repair by refrigerator type and size.