Pool Pump Repair vs. Replacement Cost Guide
A failed pump prices two different purchases. A motor-only replacement keeps the pump body and prices the motor; a full replacement prices a new pump entire. Angi repair reporting puts a motor replacement at $350 to $700, against a full replacement average of $1,300 in the Angi replacement frame. This guide prices the repair lines, the motor line, and the full-pump bands apart, frame by frame.
Orange County, CA · Updated 2026 · Costs shown as ranges — your quote will vary by installer and scope
The two purchases, priced in named frames
| Purchase | Published 2026 band | Frame |
|---|---|---|
| Motor-only replacement | $350-$700 | Angi repair |
| Motor-only replacement | $150-$800 | HomeGuide motor |
| Full replacement, average | $1,300 average, $700-$4,000 range | Angi replacement |
| Full replacement, variable-speed installed | $800-$2,000 | HomeGuide installed |
The frames stay apart, including the two motor frames. The Angi repair frame and the HomeGuide motor frame price a motor-only purchase at different bands from different reporting mixes, and neither is averaged into the other. The full-pump bands are the hub's replacement frames, priced in full on the replacement cost hub.
Common repair lines, Angi repair frame
| Repair line | Angi repair 2026 band |
|---|---|
| Seal line | $100-$250 |
| Bearing line | $150-$350 |
| Electrical and capacitor line | $100-$250 |
| Impeller repair line | $120-$300 |
| Impeller replacement line | $150-$400 |
| Motor repair line | $200-$500 |
Each line above is a reported cost line only: a price band for a named repair purchase, stated with no procedure of any kind. Read as prices, the small lines cluster tightly -- the seal, bearing, capacitor, and impeller lines all sit between $100 and $400 in this frame -- while the motor lines sit above them. HomeGuide maintenance reporting carries the motor at its own scale: repair at $50 to $300 and replacement at $150 to $800 in that frame, named apart from the Angi repair frame.
Motor-only vs. full pump: what each purchase carries
A motor-only purchase prices the motor and its fitting labor, and leaves the pump body, housing, and impeller assembly as existing equipment. A full replacement prices the entire pump -- body, motor, and assembly -- plus the replacement labor lines on the hub, at about $200 like-for-like in the Angi frame. The gap between the columns in the first table is that scope difference, priced. Where the failure is the motor alone and the body is sound, reported guidance prices the motor line; where several lines in the repair table price together on one pump, the combined total moves toward the full-pump bands.
Reported rules of thumb: age and repair share
Repair reporting carries two rules of thumb, stated here as reported guidance only. The age rule in that reporting: a single failed line on a younger pump -- commonly framed at under about 8 years -- prices as a repair purchase, while a pump at about 8 to 10 years or older, or one with several lines failing at once, prices toward replacement. The repair-share rule in the same reporting: where a repair total approaches about half the price of a new pump, replacement is the purchase the guidance points to. Both are reported heuristics from repair reporting, not findings about any individual pump, and neither overrides a written diagnosis on a quote.
How this guide differs from the equipment umbrella and the heater hub
The pool equipment replacement guide carries a repair-vs-replace line for a whole equipment pad, across pumps, filters, automation, and heaters quoted as a bundle decision. This guide is pump-specific: motor-only against full pump, with pump repair lines priced one by one. The pool heater hub prices a heater purchase; a heater repair decision is a different equipment lane, and no heater figure appears here. The speed-class choice inside a full replacement prices on the variable-speed vs. single-speed guide.
- Purchase named on the quote: repair line, motor, or full pump
- Frame named: Angi repair, HomeGuide motor, or replacement frame
- Repair lines shown one by one, never as a lump sum
- Age and repair-share read as reported guidance only
- Diagnosis stated in writing on the quote
Frequently asked questions
How much does a pool pump motor replacement cost?
Angi repair reporting puts a motor replacement at $350 to $700. HomeGuide maintenance reporting puts motor replacement at $150 to $800 in its own frame. The frames price different reporting mixes and stay named apart, never averaged.
What do common pump repair lines cost?
In the Angi repair frame, the seal line runs $100 to $250, the bearing line $150 to $350, the electrical and capacitor line $100 to $250, and impeller lines $120 to $300 for repair and $150 to $400 for replacement, each as a reported cost line only.
What is the reported repair-share rule of thumb?
Repair reporting states a repair-share heuristic: where a repair total approaches about half the price of a new pump, replacement is the purchase the guidance points to. It is reported guidance only, not a finding about any individual pump.
What age does reported guidance use for repair vs. replacement?
Repair reporting commonly frames a single failed line on a pump under about 8 years as a repair purchase, and a pump at about 8 to 10 years or older, or with several lines failing at once, toward replacement. Stated as reported guidance only.
Is pump repair the same decision as the equipment-pad decision?
No. The pool equipment replacement guide prices repair vs. replace for a whole pad as a bundle. This guide prices the pump alone: its repair lines, its motor line, and its full replacement bands. The pool heater hub prices a heater, a separate lane.