Pool Liner Replacement Cost in Orange County
Pool liner replacement in two frames kept apart: Frame A averages about $2,500, liner and labor; Frame B prices the installed project at $2,000 to $7,500.
Orange County, CA · Updated 2026 · Costs shown as ranges — your quote will vary by installer and scope
Two published frames, named apart and never blended
| Frame | What it prices | 2026 band |
|---|---|---|
| Frame A | replacement average | about $2,500 |
| Frame A | overall range | $350-$5,800 |
| Frame B | overall replacement, installed | $2,000-$7,500 |
| Frame B | inground replacement, installed | $3,000-$7,500 |
| Frame B | above-ground replacement, installed | $2,000-$5,000 |
Neither frame folds into the other. Frame A (liner-and-labor) reads the replacement as the liner plus the labor lines around it; Frame B (installed-total) reads the whole project as one installed total. The attachment and thickness layer prices on the by-type guide; the pool-type layer on the inground vs. above-ground guide. Orange County quotes name the older tract-suburb house whose pool frame still works while its membrane is the faded or torn piece: the purchase is never the pool, it is the liner.
By-size lines, as reported in Frame A
| Size line, as published | Frame | 2026 band |
|---|---|---|
| Per square foot, average | Frame A | about $5 |
| 12x20 pool | Frame A | $1,200 |
| 16x32 pool | Frame A | $2,560 |
| 18x36 pool | Frame A | $3,240 |
| 20x40 pool | Frame A | $4,000 |
Size drives Frame A: the frame reads the project at about $5 per square foot, each named size on its own line. Frame B prints no by-size table; its totals read by pool type instead, and that absence prints as published.
By-type lines, as reported in Frame A
| Type line, as published | Frame | 2026 band |
|---|---|---|
| Aboveground liner | Frame A | $500-$900 |
| In-ground liner | Frame A | $1,200-$2,100 |
| Overlap liner | Frame A | $200-$600 |
| Uni-bead liner | Frame A | $400-$900 |
| Beaded liner | Frame A | $500-$1,000 |
The pool-type and attachment lines print side by side here as the project summary; the full attachment layer, with the Frame B material lines beside these, prices apart on the by-type guide. No line here converts into a line from the other frame.
Labor, thickness, and replacement-cycle lines, as reported
| Line, as published | Frame | 2026 band |
|---|---|---|
| Labor, aboveground | Frame A | $250-$800 |
| Labor, in-ground | Frame A | $1,000-$2,500 |
| Thicker liner, over the standard line | Frame A | $300-$500 more |
| Published replacement cycle | Frame B | 7-10 years |
Each line reads as its own reported category, apart from the totals. Frame A prints the standard liner at 20 mil, the thicker-mil lines $300 to $500 over it. Frame B publishes the replacement cycle at 7 to 10 years: the liner is a recurring purchase, and the cycle line prints as a cost-planning line, nothing more.
The neighbours, differentiated head-on
A resurfacing guide prices a concrete pool's plaster, a construction guide prices a whole pool, a deck guide prices the surround: this cluster prices only the liner. The pool resurfacing page prices plaster renewal for concrete pools; the resurfacing bands never price a vinyl membrane. The pool deck hub prices the surround around the pool; the deck bands never price the membrane inside it. The pool heater page prices heating equipment; the heater bands never price a liner. The pool equipment page prices pumps and equipment; the equipment bands never price a liner. The saltwater conversion page prices a salt system; the salt bands never price a liner.
Reading a liner replacement quote, as reported lines only
A quote should name its frame and pool type beside every total: a Frame A liner-and-labor reading or a Frame B installed total, lines apart.
- Frame named on every line: liner-and-labor or installed-total
- Pool type named beside every total
- Size, attachment, and thickness lines shown apart
- Labor lines shown apart
Frequently asked questions
How much does pool liner replacement cost in Orange County?
Two frames, never blended. Frame A: average about $2,500, overall range $350 to $5,800, aboveground liners $500 to $900, in-ground liners $1,200 to $2,100. Frame B: $2,000 to $7,500 installed overall, inground $3,000 to $7,500, above-ground $2,000 to $5,000.
What do the by-size lines print at, as published?
Frame A reads the project at about $5 per square foot: 12x20 at $1,200, 16x32 at $2,560, 18x36 at $3,240, 20x40 at $4,000. Frame B prints no by-size table.
What do the labor lines print at, as published?
Frame A: labor at $250 to $800 aboveground and $1,000 to $2,500 in-ground, each apart from the liner lines, inside its own frame.
How often is a pool liner replaced, as published?
Frame B publishes a replacement cycle of 7 to 10 years. The cycle prints here as a cost-planning line only: the liner is a recurring purchase.
Is pool resurfacing the same purchase as a liner replacement?
No, head-on: a resurfacing guide prices a concrete pool's plaster renewal, on the resurfacing pages apart. A vinyl-liner pool carries a membrane over a frame; this hub prices only replacing that membrane.