Paver Patio Cost in Orange County

Paver patio cost in two frames kept apart: Frame A counts the finished patio by size and material; Frame B counts the installed square foot, split into material and labor lines.

Orange County, CA · Updated 2026 · Costs shown as ranges — your quote will vary by installer and scope

Reading this guide: every figure below is a range compiled from published 2026 pricing data for Orange County — not a quote. Two published frames, Frame A (the Angi by-size-and-material frame) and Frame B (the HomeGuide installed-average frame), are named apart and never blended: Frame A counts the finished patio by size and material, Frame B counts the installed square foot split into material and labor lines. Always get 3 written quotes.

The unit-paver split, stated head-on first

FrameWhat it counts2026 band
Frame Athe finished patio, by size and material as listed$8-$25 per square foot overall
Frame Bthe installed square foot, split into material and labor lines$10-$17 per square foot on average
Frame Ba 20x20 patio, counted installed whole in this frame$4,000-$6,800

This cluster prices paver patio installation alone: unit pavers on a prepared base as a ground-level patio, by size crossed with material. Named apart, never a row here: paver driveways, poured and stamped concrete patios, paver sealing and re-sanding, deck construction, and whole-backyard landscaping budgets.

Frame A lines, as reported: the finished patio by size and material

Frame A line, as publishedReading2026 band
Installed, overallper square foot, all materials$8-$25
Concrete paversper square foot, as listed$8-$15
Brick or clay paversper square foot, as listed$10-$20
Natural stone paversper square foot, as listed$15-$50
10x10 patiofinished patio, by size$800-$2,500
10x20 patiofinished patio, by size$1,600-$5,000
20x20 patiofinished patio, by size$3,200-$10,000

Frame A, counted by size and material: each row is one reading of the finished patio, standing side by side, not as parts of one printed total.

Frame B lines, as reported: the installed square foot, split

Frame B line, as publishedReading2026 band
Average paver patio, installedper square foot, installed$10-$17
20x20 patio, installedfinished size, counted in this frame$4,000-$6,800
High-end workper square foot, installed$25-$40
Materials lineper square foot$3.40-$6.20
Labor lineper square foot$6.25-$10.90

Frame B, counted by the installed square foot: the materials and labor lines split that square foot inside this frame alone. No Frame B line is added into a Frame A size total.

The neighbours, differentiated

The paver driveway hub prices driveways as a vehicle-load base job. The concrete patio hub prices a poured slab, the sealing clusters price maintenance of an existing patio, the deck hub prices deck construction, and the landscaping hub prices whole-backyard budgets. This cluster prices the unit-paver patio alone, apart from the driveway bands.

Reading a paver patio quote

Cost guide, not advice: the ranges below are compiled from published 2026 pricing data and industry sources. Your price will vary with patio size and paver material. This guide does not endorse, rate, or recommend any firm or contractor. Figures are informational ranges only, not quotes.

Frequently asked questions

How much does a paver patio cost in Orange County?

Two frames, never blended. Frame A, by size and material: installed at $8 to $25 per square foot overall, a 10x10 at $800 to $2,500 and a 20x20 at $3,200 to $10,000. Frame B: an average at $10 to $17 per square foot installed and $4,000 to $6,800 at 20x20.

Why do the two frames print different figures for this job?

Counting. Frame A counts the finished patio by size and material, one band per line as listed. Frame B counts the installed square foot, split into material and labor lines. Neither frame is a smaller reading of the other, and no Frame B line is summed into a Frame A size total.

What does Frame A count inside its size bands, as reported?

Frame A counts the finished patio: per-square-foot bands by material, concrete pavers at $8 to $15, brick or clay at $10 to $20, and natural stone at $15 to $50, and totals by size, from a 10x10 at $800 to $2,500 to a 20x20 at $3,200 to $10,000.

What does Frame B print for materials and labor, as reported?

Frame B prints materials at $3.40 to $6.20 per square foot and labor at $6.25 to $10.90 per square foot, inside an average installed band of $10 to $17 per square foot and high-end work at $25 to $40 per square foot.

Is a paver patio the same purchase as a paver driveway, a concrete patio, paver sealing, a deck, or a whole-backyard landscaping job?

No, head-on: this cluster prices paver patio installation alone. Paver driveways sit in the driveway hub, poured and stamped concrete patios in the concrete patio hub, paver sealing and re-sanding in their own clusters, deck construction in the deck hub, and whole-backyard landscaping budgets in the landscaping hub.

Related guides