Patio Heater Installation Cost Breakdown Guide
The component layer prints apart by frame: unit and basic-labor lines name on Frame A, while equipment, installation, and accessories lines print per configuration on Frame B.
Orange County, CA · Updated 2026 · Costs shown as ranges — your quote will vary by installer and scope
The cost-component layer, priced apart
| Frame | Component line, as published | 2026 band |
|---|---|---|
| Frame A | electric heater unit | $210.78-$259.09 |
| Frame A | gas heater unit | $463.29-$569.48 |
| Frame B | equipment line, per configuration | $200-$10,000 |
| Frame B | accessories line, per configuration | $50-$1,000 |
Every figure here is a published component line inside its own frame, never added into a new total on this page. The unit components are Frame A's printed lines; the equipment and accessories components are Frame B's printed lines per configuration. The project whole prices on the patio heater hub; the heater-type layer on the type guide.
Unit and basic-labor lines, as reported
| Component line, as published | Frame | 2026 band |
|---|---|---|
| Electric patio heater unit | Frame A | $210.78-$259.09 |
| Gas patio heater unit | Frame A | $463.29-$569.48 |
| Halogen patio heater unit | Frame A | $237.33-$291.73 |
| Basic-labor line | Frame A | named, inside each total |
Frame A names two components on each calculator: a unit line, printed with its own band for each heater type, and a basic-labor line, named on the calculator and read inside the per-heater installed total rather than as a separate band carried here. No basic-labor figure is derived from a unit band or a total on this page, and no Frame B component is priced from Frame A's table.
Frame B component lines per configuration, as reported
| Configuration | Equipment | Installation | Accessories | Total project |
|---|---|---|---|---|
| Single portable unit | $200-$500 | no priced line printed | $50-$100 | $250-$600 |
| Electric wall-mount pair | $400-$1,200 | $300-$600 | $100-$200 | $800-$2,000 |
| Natural-gas system | $800-$2,000 | $1,000-$2,500 | $200-$500 | $2,000-$5,000 |
| Infrared system | $1,200-$3,000 | $800-$1,500 | $200-$500 | $2,200-$5,000 |
| Restaurant patio, 4-6 units | $3,200-$10,000 | $1,500-$3,000 | $500-$1,000 | $5,200-$14,000 |
Frame B prints three component lines per configuration beside its total: an equipment line, an installation line, and an accessories line. The portable configuration prints no priced installation line in the table carried here; its total sits on its equipment and accessories lines as printed. Each configuration's components and total stay on that configuration's own row.
Installed totals behind the components, as reported
| Total line, as published | Frame | 2026 band |
|---|---|---|
| Electric heater, installed average, per heater | Frame A | $437-$532 |
| Gas heater, installed average, per heater | Frame A | $692-$846 |
| Halogen heater, installed average, per heater | Frame A | $464-$565 |
| Restaurant patio, total project | Frame B | $5,200-$14,000 |
The components price against two installed readings, each on its own frame: Frame A's per-heater installed averages, counted one heater at a time, and Frame B's total-project bands, counted by whole configuration. A component line and an installed total are two readings of the project, never one price, and the component bands are never summed into a new total here. The readings sit side by side on the hub, each named with its own frame.
Reading a breakdown quote, by frame
A component line answers the line-item question: the unit, the equipment, the installation line, or the accessories. A quote that names only one component is read against the table it belongs to, and against no other frame's total.
- Unit lines read apart from basic-labor lines
- Equipment and accessories lines read apart from installed totals
- Each frame's component reading read on its own frame only
Frequently asked questions
What does the patio heater unit alone cost, as published?
Frame A prints unit lines by type: electric at $210.78 to $259.09, gas at $463.29 to $569.48, and halogen at $237.33 to $291.73. Each unit line sits apart from its type's installed average, which prints at $437 to $846 per heater depending on type.
What basic-labor line does Frame A print, as reported?
Frame A names a basic-labor line on each of its three calculators, read inside the per-heater installed totals of $437 to $532 electric, $692 to $846 gas, and $464 to $565 halogen. No separate basic-labor band is carried in the lines here, and none is derived from a total.
What component lines does Frame B print per configuration, as reported?
Frame B prints an equipment line, an installation line, and an accessories line per configuration: for a natural-gas system, equipment $800 to $2,000, installation $1,000 to $2,500, and accessories $200 to $500, beside a $2,000 to $5,000 total project band.
Do the component bands add up to a new total on this guide?
No. Components are printed as separate readings beside the totals their own frame publishes. This guide never sums component bands into a new total, and never carries a component from one frame against a total from the other.
Where do the by-type prices sit in the breakdown layer?
Nowhere on this page: electric, gas, and halogen installed lines by type, and the five configuration totals, are the heater-type layer, priced on the patio heater cost by type guide. This guide prices cost-component lines only.