Main Shutoff Valve Cost by Type Guide
The type layer prints apart by frame: Frame A prices gate and ball as valve-alone lines; Frame B prices most valves whole and the smart or automatic lane apart, before installation.
Orange County, CA · Updated 2026 · Costs shown as ranges — your quote will vary by installer and scope
The type layer, priced apart
| Frame | Type line, as published | 2026 band |
|---|---|---|
| Frame A | gate valve, valve alone | $10-$50 |
| Frame A | ball valve, valve alone | $10-$20 |
| Frame B | most valves, on average | $10-$50 |
| Frame B | smart / automatic valve, before installation | $150-$500+ |
Every figure here is a published line inside its own frame, never averaged into one band. The manual types print as valve-alone readings on both frames; the smart or automatic lane prints on Frame B as a before-installation reading, apart from every installed total. The project whole prices on the main shutoff valve hub; the component layer on the breakdown guide.
Gate and ball lines, as reported
| Type line, as published | Frame | 2026 band |
|---|---|---|
| Gate valve, valve alone | Frame A | $10-$50 |
| Ball valve, valve alone | Frame A | $10-$20 |
| Most valve types, valve alone | Frame A | $10-$50 |
| Heavy-duty models, valve alone | Frame B | $150 or more |
Frame B names the two manual types in prose -- the gate valve common in older homes, the ball valve found in most newer homes -- and prices most valves at $10 to $50 on average. Frame A prints the two types as separate table lines. Neither valve-alone figure is read as an installed total here.
Installed readings by type, as reported
| Reading, as published | Frame | 2026 band |
|---|---|---|
| Gate valve, installed as its own type | both frames | no priced line printed |
| Ball valve, installed as its own type | both frames | no priced line printed |
| Gate-to-ball conversion, split out | both frames | no priced line printed |
| Any manual type, project whole | Frame B | $250-$600 |
Neither frame splits its installed total by gate against ball. The conversion reading named in this cluster's scope -- a failed or seized gate valve replaced -- prints in neither frame as a band of its own; it is read against the project totals on the hub.
Smart and automatic lines, as reported
| Smart line, as published | Frame | 2026 band |
|---|---|---|
| Smart / automatic valve, before installation | Frame B | $150-$500+ |
| Smart / automatic valve, valve alone | Frame A | no priced line printed |
| Manual types, valve alone, for contrast | Frame B | $10-$50 |
| Smart / automatic project, installed as its own type | both frames | no priced line printed |
The smart or automatic lane is the high type lane on this layer, printed as a device reading counted before installation. No installed smart total is summed from it here, and no manual figure is carried against it.
Reading a by-type quote, by frame
A type line answers the type question: gate, ball, or smart or automatic. A quote names its type and its frame beside it, and its installed total apart from any valve-alone reading.
- Type named beside every band
- Valve-alone lines read apart from installed totals
- Each frame's type reading read on its own frame only
Frequently asked questions
How much does a gate valve print at, as published?
Frame A prints a gate valve at $10 to $50, valve alone. Frame B names the gate valve as the type common in older homes and prices most valves at $10 to $50 on average. Neither reading is an installed total, and neither frame prints an installed gate-only band.
How much does a ball valve print at, as published?
Frame A prints a ball valve at $10 to $20, valve alone -- the narrowest type line on this layer. Frame B names the ball valve as the type found in most newer homes, inside its most-valves reading of $10 to $50 on average. No installed ball-only band prints in either frame.
What does the smart or automatic lane print at, as reported?
Frame B prints smart or automatic shut-off valves at $150 to $500 or more, counted before installation -- the high lane on this layer, apart from the manual band of $10 to $50. Frame A prints no smart line, and no installed smart total is summed here.
Are gate-to-ball conversions priced as their own type, as reported?
No priced line prints for a conversion as its own reading in either frame. Both frames publish this project as one replacement reading -- Frame A at $375 to $600 for most homeowners, Frame B at $250 to $600 -- and the conversion is read against those project totals on the hub.
Which type line prints lowest, as reported?
The ball valve on Frame A, at $10 to $20 valve alone. The lowest project reading on this layer is Frame B's whole-project range of $250 to $600, which is a total across types and never read as a type line of its own.