Cooktop Repair Cost by Part Guide

The single repair priced by failed part and by cooktop type: igniter, board, and glass rows apart.

Orange County, CA · Updated 2026 · Costs shown as ranges — your quote will vary by installer and scope

Reading this guide: every figure below is a range compiled from published 2026 pricing data — not a quote. Two published frames are named apart and never blended: Frame A (the Angi frame) counts repair lines by failed part and by stove type; Frame B (the HomeGuide frame) counts a glass top replacement by materials and labor. Always get 3 written quotes.

The repair readings, priced apart by frame

Repair readingFrame A readingFrame B reading
Glass top replacement$250-$600 part row$200-$1,000 total
Igniter replacement$150-$300 part rowin glass-top frame
Repair overall$100-$500 general band$400 Frame A average, apart

Each reading is one frame's own counting of one repair case: a part row counts the named failed part, a type row counts the same visit by its cooktop form, and the two are never blended.

The part rows, priced apart

Part rowFrame A readingFrame B reading
Igniter / burner and element$150-$300 / $120-$250in glass-top frame
Control board / thermostat and sensor$200-$600 / $100-$300in glass-top frame
Glass top / knob and switch$250-$600 / $75-$150$200-$1,000 total / in frame
Wiring / gas valve and gas line$150-$400 / $150-$400 or morein glass-top frame

Frame A prints its part rows as repair-type rows; its add-on rows stand beside them: a burner at $100 to $250 per unit, a control knob at $20 to $50 per knob.

The type rows, priced apart

Type row, as publishedFrame2026 reading
GasFrame A$150-$500
Electric coil and radiant glassFrame A$100-$350 electric row
InductionFrame A$200-$500 or more
Dual-fuelFrame A$200-$600

The type rows count the same visit by its cooktop form: Frame A prints one electric row, and the coil and radiant glass forms stand inside it as printed, never split into figures of their own. The two frames count the same glass-top job differently -- Frame A reads a glass top replacement at $250-$600 as its own part row, averaging $400, while Frame B counts the same job by materials at $150-$700 and labor at $50-$300 for a total of $200-$1,000. That difference is named as a frame difference on every page here, never averaged.

The totals behind the rows, and the neighbours named apart

Behind the rows stand the headline lines: Frame A generally at $100-$500 with its glass top averaging $400, Frame B glass top total at $200-$1,000 by materials and labor. The repair ticket against the replacement ticket prices apart on the repair-vs-replacement guide. Named apart, never a row here: the oven repair cluster's oven-cavity rows, an oven row and never a cooktop row; cooktop and wall-oven installation rows, a mounting purchase and never a repair; the appliance-repair hub's oven and range family row, a family-table row and never a cooktop-repair price; and the appliance replace-vs-repair guide's decision band, a rule and never a price.

Reading a by-part quote, by frame

Cost guide, not advice: the ranges below are compiled from published 2026 pricing data. Your price will vary with failed part and cooktop type as quoted. This guide does not endorse, rate, or recommend any firm or brand. Figures are ranges only, not quotes.

Frequently asked questions

What does cooktop repair cost by part, as reported?

Frame A prints an igniter at $150 to $300, a burner at $120 to $250, a control board at $200 to $600, and a glass top at $250 to $600 as repair-type rows. Frame B counts a glass top by materials and labor, a $200 to $1,000 total. A frame difference, never averaged.

What does the cooktop type row print at, as reported?

Frame A prints gas at $150 to $500, electric at $100 to $350, induction at $200 to $500 or more, and dual-fuel at $200 to $600 as type rows, the coil and radiant glass forms inside the one electric row. Frame B prints no type rows, apart.

What do the knob and wiring rows print at, as reported?

Frame A counts by repair type, standing apart: a knob or switch at $75 to $150, wiring at $150 to $400, a gas line at $150 to $400 or more beside them. Frame B stands in its $200 to $1,000 total, apart.

What do the add-on rows print at, as reported?

Frame A prints a burner replacement at $100 to $250 per unit and a control knob at $20 to $50 per knob as add-on rows, a thermostat at $100 to $300 as its own row, its general band at $100 to $500 beside them.

Is a part row the same purchase as a new cooktop or an oven repair?

No. Each row prices one failed part in one cooktop repair visit, off a $100 to $500 band in Frame A and a $200 to $1,000 glass top total in Frame B. The oven-cavity rows, installation rows, the hub oven and range row, and the decision band sit in their own lanes, named apart.

Related guides