Cooktop Installation Cost Guide
The cooktop alone is its own buyer query, priced apart from the wall oven it often sits above or beside. Angi 2026 reporting puts a standard cooktop installation at $400 to $800, and a separate Angi frame prices gas cooktop installation far higher. HomeGuide 2026 data splits the cooktop into unit, labor, and installed lines. This guide prices the counter appliance frame by frame.
Orange County, CA · Updated 2026 · Costs shown as ranges — your quote will vary by installer and scope
The standard band, inside the Angi cooktop frame
| Cooktop line | Cost, Angi 2026 | Frame note |
|---|---|---|
| Standard installation | $400-$800 | headline band |
| Average, standard installation | $500 | headline average |
| Basic electric, low end | $350 | reported low |
| High-end gas or induction, complex modifications | over $2,500 | reported high reach |
| Permits, as a reported line | $150-$300 | reported context only |
Read the band as one frame's standard-installation headline, never as a blended cooktop price. The Angi cooktop page, updated May 3, 2026, names cooktop type, size, and placement as the drivers inside the band, with counter and cabinet modification named among the added lines. The combined project, cooktop and wall oven together, prices on the cooktop and wall oven installation cost hub.
The gas side, inside the Angi gas-cooktop frame as its own source
| Gas cooktop line | Cost, Angi gas frame 2026 |
|---|---|
| Gas cooktop installation | $1,200-$2,200 |
| Average, standard setup | $1,700 |
| Low end, compact units | $900 |
| High end, larger or custom designs | $3,500 |
| Permit fees, as a reported line | $50-$300 |
The same counter carries a second published frame, kept named as its own separate source. The Angi gas-cooktop frame, updated October 16, 2026, prices a different starting point from the standard band above: a gas installation at $1,200 to $2,200, with the gas-line line named as a driver of the spread. Its permit line, $50 to $300, is its own frame's line and is not merged with the standard frame's $150 to $300 line. Every gas-side figure here is a reported cost line only: nothing here describes any procedure.
The HomeGuide frame, named separate and never blended
HomeGuide prices the cooktop as three separate lines, and this guide keeps each apart. The unit alone runs $400 to $1,300. Replacement labor runs $150 to $370. In the HomeGuide kitchen frame, the cooktop installed runs $500 to $1,700, a total that pairs the unit with existing connections and is not a cutout or cabinet-modification total. No HomeGuide line is averaged with any Angi line, and a cooktop quote should name which frame each of its lines follows, whether the unit line is inside its total or carried apart, and whether any counter or cabinet line rides along with the installation lines or stands as a separate line of its own on the quote.
What moves the cooktop total, as reported drivers only
Published reporting names the drivers in plain terms, and this guide repeats them as reported drivers only. Fuel comes first: the gas frame above opens well above the standard band. The cutout comes second, because the counter the cooktop drops into is priced on the kitchen countertop cost guide when that surface itself is replaced, while cutout work inside an installation quote stays a line in the frames here. Circuit and cabinet lines follow where a project carries them, and the cabinet appliance beside the cooktop prices apart on the wall oven installation cost guide.
- Frame named per line: Angi standard, Angi gas, or HomeGuide
- Unit, labor, and installed lines shown apart
- Permit line shown apart, inside its own frame
- Cutout and circuit lines shown apart where quoted
- Cooktop priced apart from the wall oven and the counter itself
Frequently asked questions
How much does cooktop installation cost?
Angi standard frame: $400 to $800, average $500. HomeGuide frame, named separate: replacement labor at $150 to $370, and $500 to $1,700 installed in the kitchen frame, with the unit at $400 to $1,300 alone. The frames are kept apart, never blended.
What does gas cooktop installation cost, as reported?
Angi gas-cooktop frame, named as its own separate source: $1,200 to $2,200, average $1,700, with a low of $900 and a high of $3,500, and permit fees at $50 to $300 as a reported line. That frame stands apart from the Angi standard band.
What does the cooktop unit alone cost, before installation?
HomeGuide frame: $400 to $1,300 for the unit alone. The same frame prices replacement labor apart at $150 to $370. Unit and labor are separate lines in that frame, and neither is an Angi figure.
What sits at the ends of the standard Angi band?
Angi cooktop frame: as low as $350 for a basic electric cooktop, and over $2,500 for high-end gas or induction models with complex modifications. The standard band between those ends is $400 to $800, average $500.
Is cooktop installation the same purchase as replacing the counter?
No: this guide prices the cooktop and its installation lines, cutout work inside a quote included. The kitchen countertop guides price the surface itself as its own project, and the hub prices the cooktop and wall oven as one combined project.