Built-In Microwave Cabinet and Venting Costs
The built-in total prices the unit and its labor. The lines that move a real invoice sit in the cabinetry and the wiring around it: cabinet modification and trim-kit lines, drawer-class cabinet lines, outlet and panel lines, ventilation lines, old-unit removal and disposal, and the minimum service call that floors every small job. This guide prices that layer line by line, as cost lines only.
Orange County, CA · Updated 2026 · Costs shown as ranges — your quote will vary by installer and scope
Cabinet modification and trim-kit lines
| Cabinet line | Published 2026 range |
|---|---|
| Cabinet modification | $400-$500 |
| New cabinetry | $500-$1,500 per linear foot |
| Built-in labor, for contrast | $100-$300; up to $500 or more with cabinetry work |
| Cabinet installer hourly band | $40-$80 per hour |
A built-in unit prices against the cabinet it sits in. Where the existing opening carries the unit, the cabinet layer can be a trim-kit line alone: the frame priced around the unit's face. Where the opening is altered, Angi 2026 reporting runs built-in labor to $500 or more with cabinetry work, and cabinet modification lines in this cluster run $400 to $500, with new cabinetry at $500 to $1,500 per linear foot where a run is rebuilt. The class totals behind these lines sit on the microwave installation cost hub.
Drawer-class cabinet lines
The drawer class carries the heaviest unit band in the cluster -- $1,000 to $2,000 in Angi reporting -- with installation alone at $260 to $430, and its cabinet layer prices differently from a wall built-in: the unit sits in a base cabinet, so the cabinet line is a base-cabinet line, priced with the modification band of $400 to $500 where the cabinet is altered, or inside the installation band where an existing drawer opening carries it. Two quotes for the same drawer unit can differ by the full cabinet line with both honestly scoped.
Outlet and panel lines, priced as lines only
| Electrical line | Published 2026 range |
|---|---|
| New outlet line | $150-$350 |
| Outlet upgrade line | $65-$150 |
| Panel upgrade line | $800-$2,000 |
| Electrician hourly band | $40-$100 per hour |
A mounted microwave prices against the outlet behind it. Where an outlet is added, the line runs $150 to $350 in this cluster; where an existing outlet is upgraded, $65 to $150; and a panel upgrade line, where a quote carries one, runs $800 to $2,000. This guide carries every outlet and panel figure strictly as a priced line; it gives no direction on any electrical work itself, and no figure here describes the condition of any outlet, circuit, or panel in any home.
Ventilation lines
Built-in and over-the-range classes both vent, and the ventilation layer prices apart from the cabinet layer. Venting ductwork lines in this cluster run $150 to $600, and Angi reporting runs over-the-range labor to $200 to $600 where new ducting is priced -- the lane priced in full on the over-the-range microwave installation guide. A recirculating configuration carries no ductwork line. Standalone hood ventilation, with no microwave in the scope, is priced in the range-hood cluster instead.
Old-unit removal, disposal, and minimum-service-call lines
The old unit leaves the job as two lines: a removal and disposal line, priced at $20 to $50 in this cluster where a quote carries it, and the haul-away handling inside the installer's time. At the small end, minimum pricing floors the ticket: a single built-in swap with no cabinet, outlet, or venting lines still prices from the built-in labor band of $100 to $300 in Angi reporting, which is why a small job's total sits closer to a larger job's opening figure than the unit bands alone suggest. Neighbour lanes carry their own versions of these lines on the kitchen appliance package guide and in the dishwasher cluster.
- Cabinet modification and trim-kit lines named apart
- Outlet and panel lines shown as their own lines
- Ventilation and ductwork lines shown apart
- Removal, disposal, and minimum-call lines stated on the quote
Frequently asked questions
What does cabinet modification add to a built-in microwave job?
Cabinet modification lines in this cluster run $400 to $500, and new cabinetry runs $500 to $1,500 per linear foot where a run is rebuilt. Angi 2026 reporting runs built-in labor to $500 or more where cabinetry work is priced, against a base labor band of $100 to $300.
What do outlet and panel lines cost on a microwave quote?
A new outlet line runs $150 to $350 in this cluster, an outlet upgrade $65 to $150, and a panel upgrade line $800 to $2,000 where a quote carries one, with electrician time at $40 to $100 per hour. Each prices as its own line, never inside the unit band.
What does drawer microwave installation run on its own?
Angi 2026 reporting puts drawer installation alone at $260 to $430, under a unit band of $1,000 to $2,000, for a class total of $1,260 to $2,430. A base-cabinet modification line, where the cabinet is altered, prices apart at $400 to $500.
What do ventilation lines add?
Venting ductwork lines in this cluster run $150 to $600. Angi reporting runs over-the-range labor to $200 to $600 where new ducting is priced, while a recirculating configuration carries no ductwork line at all.
What does removing the old microwave cost?
Old-unit removal and disposal prices at $20 to $50 in this cluster where a quote carries it as its own line. Small jobs also price from a minimum: a built-in swap with no add-on lines still starts from the $100 to $300 labor band.